December 2020
Installation, Operation and Maintenance Manual
VA-DC-000-1878 Rev. 0
44
Section 6: Actuator Support Information
Actuator Support Information
6.4 G2 Tool Style and Wrench Size
Table 14. G2 Tool Style and Wrench Size
6.5 G3 Tool Style and Wrench Size
Table 15. G3 Tool Style and Wrench Size
Item No. Wrench Size Item Qty.
Location or
Description
Recommended
Tool Style
1 - 110 9/16” 6 Hex Cap Screws Socket
1 - 160 9/16” 4 Hex Cap Screws Socket
1 - 180 3/8” sq. 2 Stop Screws Open End or Adjustable
1 - 190 1 - 1/8” 2 Hex Jam Nuts Open End or Adjustable
3 - 20 3/8” 2 Tie Bar (ats) Open End or Adjustable
3 - 40 3/8” sq. 1 Piston Rod Male Drive
3 - 90 1 - 1/8” 4 Standard Hex Nuts Socket
3 - 100 9/16” 4 Hex Cap Screws Socket
3 - 120 5/8” sq. 1 Pipe Plug Open End or Adjustable
3 - 130 3/16” 2 Socket Cap Screws Allen
5 - 20 9/16” 6 Hex Cap Screws Socket
7 - 80 9/16” 4 Hex Cap Screws Socket
7 - 110 1/8” sq. 1 Square Head Pipe Plug Open End or Adjustable
7 - 120 1/2” sq. 1 Square Head Pipe Plug Open End or Adjustable
12 1” 1 Breather Assembly Open End
13 3/4” 2 Vent Check Assembly Open End
- 3/8” sq. 1 Tension rod Male Drive
Item No. Wrench Size Item Qty.
Location or
Description
Recommended
Tool Style
1 - 110 9/16” 8 Hex Cap Screws Socket
1 - 160 9/16” 4 Hex Cap Screws Socket
1 - 180 1/2” sq. 2 Stop Screws Open End or Adjustable
1 - 190 1 - 5/16” 2 Hex Jam Nuts Open End or Adjustable
3 - 20 1/2” 2 Tie Bar (ats) Open End or Adjustable
3 - 40 3/8” sq. 1 Piston Rod Male Drive
3 - 90 1 - 5/16” 4 Standard Hex Nuts Socket
3 - 100 9/16” 6 Hex Cap Screws Socket
3 - 120 5/8” sq. 1 Pipe Plug Open End or Adjustable
3 - 130 3/16” 2 Socket Cap Screws Allen
5 - 20 9/16” 6 Hex Cap Screws Socket
7 - 80 9/16” 6 Hex Cap Screws Socket
7 - 110 1/8” sq. 1 Square Head Pipe Plug Open End or Adjustable
7 - 120 1/2” sq. 1 Square Head Pipe Plug Open End or Adjustable
12 1” 1 Breather Assembly Open End
13 3/4” 2 Vent Check Assembly Open End
- 3/8” sq. 1 Tension rod Male Drive
To Next Page
Loading...
