Emerson Bettis G Series - G7 Tool Style and Wrench Size; G8 Tool Style and Wrench Size

December 2020
Installation, Operation and Maintenance Manual
VA-DC-000-1878 Rev. 0
46
Section 6: Actuator Support Information
Actuator Support Information
6.8 G7 Tool Style and Wrench Size
Table 18. G7 Tool Style and Wrench Size
6.9 G8 Tool Style and Wrench Size
Table 19. G8 Tool Style and Wrench Size
Item No. Wrench Size Item Qty.
Location or
Description
Recommended
Tool Style
1 - 110 3/4” 12 Hex Cap Screws Socket
1 - 120 3/4” 4 Hex Cap Screws Socket
1 - 160 9/16” 8 Hex Cap Screws Socket
1 - 180 1 - 1/4” 2 Stop Screws Open End or Adjustable
3 - 20 3/4” sq. 2 Tie Bar (female square) Open End or Adjustable
3 - 40 3/4” sq. 1 Piston Rod Male Drive
3 - 90 2 - 3/4” 2 Heavy Hex Nuts Socket
3 - 100 1 - 1/8” 8 Hex Cap Screws Socket
3 - 120 1 - 5/16” sq. 1 Pipe Plug Open End or Adjustable
3 - 130 3/16” 2 Socket Cap Screws Allen
5 - 20 1 - 1/8” 8 Hex Cap Screws Socket
7 - 80 1 - 1/8” 8 Hex Cap Screws Socket
7 - 100 1 - 1/8” 8 Hex Cap Screws Socket
7 - 110 9/16” 1 Flush Socket Head Pipe Plug Allen
7 - 130 9/32” sq. 1 Square Head Pipe Plug Open End or Adjustable
12 1” 1 Breather Assembly Open End
13 3/4” 2 Vent Check Assembly Open End
- 3/4” 1 Tension rod Male Drive
Item No. Wrench Size Item Qty.
Location or
Description
Recommended
Tool Style
1 - 110 3/4” 8 Hex Cap Screws Socket
1 - 120 3/4” 4 Hex Cap Screws Socket
1 - 160 9/16” 8 Hex Cap Screws Socket
1 - 180 1” 2 Stop Screws Open End or Adjustable
3 - 20 3/4” sq. 2 Tie Bar (female square) Open End or Adjustable
3 - 40 3/4” sq. 1 Piston Rod Male Drive
3 - 90 2 - 3/8” 2 Standard Hex Nuts Socket
3 - 100 15/16” 8 Hex Cap Screws Socket
3 - 120 1 - 1/8” sq. 1 Pipe Plug Open End or Adjustable
3 - 130 3/16” 2 Socket Cap Screws Allen
5 - 20 15/16” 8 Hex Cap Screws Socket
7 - 80 15/16” 8 Hex Cap Screws Socket
7 - 100 15/16” 8 Hex Cap Screws Socket
7 - 110 9/16” 1 Flush Socket Head Pipe Plug Allen
7 - 130 9/32” sq. 1 Square Head Pipe Plug Open End or Adjustable
12 1” 1 Breather Assembly Open End
13 3/4” 2 Vent Check Assembly Open End
- 3/4” 2 Tension rod Male Drive