34 100-214-251 REV. 05
3.1 Shipping and Handling
3.1.1 Environmental Specifications
The Integrated Welder is an electronic unit that converts line voltage to ultrasonic energy
and controls user input for regulating the weld process. Its internal components are
sensitive to static discharge, and many of its components can be harmed if the unit is
dropped, shipped under improper conditions, or otherwise mishandled.
The following environmental guidelines should be respected in the shipping of the
Integrated Welder.
CAUTION General Warning
The Integrated Welder internal components are sensitive to static
discharge. Many components can be harmed if the unit is dropped,
shipped under improper conditions or otherwise mishandled.
Table 3.1 Environmental Specifications
Environment Range
Storage / Shipping Temperature
-25° C to +55° C (-13° F to +131° F);
up to +70° C (+158° F) for 24 hours
Shock / Vibration (transit)
40 g shock / 0.5 g and (3-100 Hz) vibration
per ASTM 3332-88 and 3580-90
Humidity 30% to 95%, non-condensing
100-214-251 IWoper.book Page 34 Friday, June 16, 2017 4:12 PM
To Next Page
Loading...