13
Application Engineering
BULLETIN
AE4-1383 R5
© 2012 Emerson Climate Technologies, Inc.
Printed in the U.S.A.
1. Press to Enter the Main Menu. Select 7. System Configuration.
2. From the System Configuration Menu Select 7. Network Setup
3. From the Network Setup Menu Select 2. Connected I/O Boards and Controllers
4. From the Setup Screen Go To The C3: ECT Tab (Press Ctrl + 3)
5. In Option #9, Enter The Number Of K5 Compressors Being Controlled By The E2.
Press To Save Changes And Return To The Previous Screen.
CoreSense K5 Programming Instructions