DVC6000f Digital Valve Controllers
December 2009
6-6
Standby Firmware Revision
Standby Firmware Revision
(STBY_FIRMWARE_REV_ALL [55.6]) shows all
device firmware revisions currently in standby.
Hardware Revision
Hardware Revision(HARDWARE_REV[48]) identifies
the electronic hardware revision.
ITK Version
ITK Version (ITK_VER [41]) identifies the major
version of the Interoperability Tester used by the
Fieldbus Foundation in certifying the device as
interoperable. This device revision meets the
requirements of version 5.
Options
(RB > Device Variables > Options)
The following parameters are contained in the the
Options menu of the resource block.
Diagnostic Options
Diagnostic Options (DIAG_OPTIONS [45]) shows the
diagnostic options available in the instrument.
Function Block Options
Function Block Options (FB_OPTIONS [44]) shows
which function blocks are licenced and enabled in the
instrument.
Miscellaneous Options
Miscellaneous Options (MISC_OPTIONS [46])
indicates which miscellaneous licensing options are
enabled.
Features Available
Features (FEATURES [17]) shows the supported
resource block options.
DD Information
(RB > Device Variables > DD Information)
DD Information contains information about the Device
Description (DD).
6
To Next Page
Loading...
Need help?
General
