Transducer Block
December 2009
4-37
Valve Serial Number
Enter the serial number of the valve (VALVE_SN [27])
on which the instrument is mounted.
Valve Style
Enter the type of valve (VALVE_TYPE [28]),
sliding-stem or rotary, on which the instrument is
mounted.
Valve Size
Enter the size of the valve (VALVE_SIZE [83.1]) on
which the instrument is mounted.
Valve Class
Enter the valve pressure class rating (VALVE_CLASS
[83.2]).
Rated Travel
Enter the valve rated travel (RATEDTRAVEL [83.3]) in
inches or mm for sliding stem valves, or in degrees of
rotation for rotary valves.
Actual Travel
Enter the actual travel (ACTUAL_TRAVEL [83.4]) in
inches or mm for sliding stem valves, or in degrees of
rotation for rotary valves.
Shaft Stem Diameter
Enter the valve stem diameter (SHAFT_STEM_DIA
[83.5]) in inches or millimeters.
Packing Type
Enter the valve packing construction
(PACKING_TYPE [83.6]).
Inlet Pressure
Enter the valve inlet pressure (INLET_PRESSURE
[83.7]).
Outlet Pressure
Enter the valve outlet pressure (OUTLET_PRESSURE
[83.8])
in psig, kPa, Bar, inHg, inH
2
O, or kg/cm
2
.
Trim
Seat Type
Enter the valve seat type (SEAT_TYPE [84.1]).
Leak Class
Enter the valve leak class (LEAK_CLASS [84.2]).
Port Diameter
Enter the valve port diameter (PORT_DIAMETER
[84.3]) in inches or mm.
Port Type
Enter the valve port type (PORT_TYPE [84.4]).
Flow Direction
Enter the flow direction (FLOWDIRECTION [84.5])
through the valve.
Push Down To
Enter the effect on valve movement when the stem is
moved down (PUSH_DOWN_TO [84.6]).
Flow Tends To
Enter the effect on valve travel with increasing flow
(FLOW_TENDS_TO [84.7]).
Unbalanced Area
Enter the valve unbalanced area
(UNBALANCED_AREA [84.8]) in in
2
or mm
2
.
Actuator
Actuator Manufacturer
Enter the manufacturer’s identification number
(ACT_MAN_ID [22]) of the actuator on which the
instrument is mounted. Select from the drop-down list
or enter the manufacturer’s identification number as
defined by the Fieldbus Foundation. For Fisher, the
manufacturer ID hex value is 005100.
4