FloBoss 103/104 Instruction Manual
Revised August-2017 I-3
M
Memory ............................................................. 1-17
Metric .................................................................. 6-2
Microprocessor .......................................... 1-7, 1-17
Min / Max Historical Log ................................... 1-13
Minute Historical Log ........................................ 1-13
Monitoring ......................................................... 1-19
Mounting ............................................................. 2-4
N
National Electrical Code
NEC .................................................. 2-4, 3-1, 3-8
NEMA .................................................................. 2-2
O
Operation .......................................................... 2-12
Operator Interface Port ..................................... 1-18
Wiring ............................................................. 5-3
Options ................................................................ 1-9
Orifice .................................................................. 6-1
Overview ............................................................. 1-2
P
Periodic Log
See Hourly Historical Log ............................. 1-13
PID Control ....................................................... 1-15
Piping .................................................... 2-5, 6-2, 7-3
Polarity .............................................................. 1-20
Ports
Comm 1 .......................................................... 5-2
Comm 2 .......................................................... 5-1
Power
Before Removing .......................................... 3-10
Operating ...................................................... 1-20
Requirements .......................................... 3-1, 3-4
Sleep Mode .................................................. 1-20
Solar Power .................................................... 3-4
Surge Protection ............................................... 3-2
Wiring ........................................................... 3-10
Power Wiring ...................................................... 3-1
Pressure Connections ................................. 6-2, 7-3
Pressure Transducer .......................................... 7-1
Process Connections ............................ 2-5, 6-2, 7-3
Processor ............................................................ 1-7
Processor module ............................................... 1-6
Product Overview ............................................... 1-2
Public Switched Telephone Networks
PSTNs ............................................................ 5-4
Pulse Counts ...................................................... 7-1
Pulse Inputs ................................. 1-11, 4-7, 7-1, 7-2
Wiring I/O Card ............................................... 4-7
Pulse Interface Module ....................................... 7-1
R
Radio Frequency Interference ............................ 3-2
RAM .................................................................... 1-7
RBX Function .................................................... 1-15
Real-Time Clock ............................................... 1-19
Related technical information ........................... 1-21
Removing power ................................................. 9-6
Repair ................................................................. 9-1
Reset Jumper ...................................................... 9-5
Restart ................................................................ 9-6
RFI ...................................................................... 3-2
ROM
Flash ............................................................... 1-7
RS-232 Communication Card
Wiring .............................................................. 5-4
RTD .................................... 1-7, 1-8, 1-11, 1-19, 7-1
Wiring .............................................................. 4-8
S
Security ............................................. 1-8, 1-15, 1-18
Site Requirements .............................................. 2-3
Sleep Mode ....................................................... 1-20
Software Watchdog ........................................... 1-20
Solar Panel ......................................................... 1-9
Solar Panels ........................................................ 2-3
Power .............................................................. 3-4
Sizing .............................................................. 3-5
SRAM .................................................................. 1-7
SRBX ................................................................ 1-15
Start..................................................................... 9-6
Startup .............................................................. 2-11
Startup and Operation....................................... 2-11
Static Pressure ...........................1-11, 1-12, 6-2, 7-1
Static Random Access Memory
SRAM ........................................................... 1-17
Surge Protection .................................................. 3-2
System Voltage ................................................... 3-4
T
Tables
1-1. Additional Technical Information ........... 1-21
4-1. RTD Signal Routing ................................. 4-8
5-1. Local Operator Interface Port to PC
Comm Port Wiring ........................................ 5-3
5-2. Communications Card Signals ................ 5-4
5-3. EIA-232 (RS-232) Communications
Card Wiring................................................... 5-4
5-4. Dial-Up Modem Communications Card
Wiring ........................................................... 5-5
Temperature ..............................1-11, 1-12, 2-2, 7-1
See RTD ................................................ 1-11, 7-1
Terminal Connections ......................................... 3-8
Termination Board
Input/Output Points ......................................... 4-1
Termination module ............................................ 1-6
Tests
Automatic ...................................................... 1-19
Troubleshooting .................................................. 9-1