EasyManua.ls Logo

Emerson Liebert GXT MT+LB 10KL - 6 Specifications

Emerson Liebert GXT MT+LB 10KL
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
6. Specifications
MODEL GXT MT+ LB, 10kVA
CAPACITY* 10000 VA / 8000 W
INPUT
Voltage Range
Low Line Loss
110 VAC ± 3 % at 50% Load;
176 VAC ± 3 % at 100% Load
Low Line Comeback Low Line Loss Voltage + 10V
High Line Loss 300 VAC ± 3 %
High Line Comeback High Line Loss Voltage - 10V
Frequency Range
46Hz ~ 54 Hz @ 50Hz system
56Hz ~ 64 Hz @ 60Hz system
Phase Single phase with ground
Power Factor
> 0.99 at 100% Load
OUTPUT
Output voltage 208/220/230/240VAC
AC Voltage Regulation ± 1%
Frequency Range
(Synchronized Range)
46Hz ~ 54 Hz @ 50Hz system
56Hz ~ 64 Hz @ 60Hz system
Frequency Range (Batt. Mode) 50 Hz ± 0.1 Hz or 60Hz ± 0.1 Hz
Overload
AC mode
100%~110%: 10min110%~130%: 1min>130% : 1sec
Battery mode
100%~110%: 30sec110%~130%: 10sec>130% : 1sec
Current Crest Ratio 3:1 max
Harmonic Distortion
3 % @ 100% Linear Load; 6 % @ 100% Non-linear Load
Transfer Time
Line Battery 0 ms
Inverter Bypass 0 ms
EFFICIENCY
AC mode
>
90
%
Battery Mode > 89%
BATTERY
Standard
Model
Type & Numbers 12 V / 9 Ah x 20
Recharge Time 9 hours recover to 90% capacity
Charging Current
Default : 1 A ± 10%
M
ax.
: 2
A ± 10%
Charging Voltage 14.4 V ± 1%
Long-run
Model
Type Depending on applications
Numbers 16 – 20 Derating capacity = original real power capacity x N/20
Charging Current
Default: 4 A ± 10%
Max.: 6A ± 10%
Charging Voltage
14.4
V ± 1%
PHYSICAL
Standard
Model
Dimension,
DXWXH(mm)
442x 190 x 688
Net Weight (kgs) 82
Long-run
Model
Dimension, DXWXH(mm)
442x 190 x 318
Net Weig
ht
(kgs)
2
3
ENVIRONMENT
Operation Temperature
0 ~ 40°C
(battery life cycle will be shorten when temperature is above 25°C)
Operation Humidity <95 % and non-condensing
Operation Altitude** <1000m
Acoustic Noise Level
Less than
58
dB @ 1 Meter
MANAGEMENT
Smart RS-232 or USB
Supports Windows® 2000/2003/XP/Vista/2008, Windows® 7, Linux, Unix, and
MAC
Optional SNMP Power management from SNMP manager and web browser
* Derate capacity to 60% of capacity in CVCF mode and to 90% when the output voltage is adjusted to 208VAC.
**If the UPS is installed or used in a place where the altitude is above than 1000m, the output power must be derated one percent per 100m.
***Product specifications are subject to change without further notice.

Related product manuals