Chapter 3 Operation And Display Panel 17
Liebert GXT4 UPS 700VA ~ 3000VA (230V) User Manual
1 UPS
2 BATTERY
3 OPERATION MODE
4 OUTLET1
5 OUTLET2
6 LCD
7 FACTORY DEFAULT
Figure 3-8 CONFIGURATION screen
In the CONFIGURATION screen, press the UP or DOWN button to move the cursor to the required item, and press
the ENTER button to enter its submenu or set its parameter.
1. UPS screen
Select Main Menu -> 2 CONFIGURATION -> 1 UPS to enter the UPS screen. This menu has four screens, as shown
in Figure 3-9.
Figure 3-9 UPS screen
Press the UP or DOWN button to move the cursor to the required item, and press the ENTER button to confirm the
settings.
2. BATTERY screen
Select Main Menu -> 2 CONFIGURATION -> 2 BATTERY to enter the BATTERY screen. This menu has five
submenus, as shown in Figure 3-10.
BATT REPLACE TIME
2 0 1 2 Y 1 2 M 1 2 D
Figure 3-10 BATTERY screen
Press the UP or DOWN button to increase or decrease the value of the settings, and press the ENTER button to
confirm it.
3. OPERATION MODE screen
Select Main Menu -> 2 CONFIGURATION -> 3 OPERATION MODE to enter the OPERATION MODE screen, as
shown in Figure 3-11.
Figure 3-11 OPERATION MODE screen
To Next Page
Loading...
