Emerson Liebert GXT4-700RT230 - Page 26

18 Chapter 3 Operation And Display Panel
Liebert GXT4 UPS 700VA ~ 3000VA (230V) User Manual
Press the UP or DOWN button to move the cursor to the required item, and press the ENTER button to confirm the
settings.
4. OUTLET1 screen
Select Main Menu -> 2 CONFIGURATION -> 4 OUTLET1 to enter the OUTLET1 screen. This menu has two
submenus, as shown in Figure 3-12.
Figure 3-12 OUTLET1 screen
1) Select ‘1 OUTLET CONTROL’ and press the ENTER button to enter the OUTLET CONTROL screen, as shown in
Figure 3-13.
Outlet control is on Outlet control is off
Figure 3-13 OUTLET CONTROL screen
Press the UP or DOWN button to move the cursor to the required item, and press the ENTER button to confirm the
settings.
2) Select ‘2 OUTLET SETTING’ and press the ENTER button to enter the OUTLET SETTING screen, as shown in
Figure 3-14.
Figure 3-14 OUTLET SETTING screen
Press the UP or DOWN button to move the cursor to the required item, and press the ENTER button to confirm the
settings.
5. OUTLET2 screen
The OUTLET2 screen is the same as the OUTLET1 screen. You can also set the same settings as OUTLET1 screen.
Select ‘YES’ and press the ENTER button in the screen shown in Figure 3-15, the OUTLET2 screen will apply the
same settings as the OUTLET1 screen.