Installation Manual 11
Mounting
2Mounting
2.1 Mount the applications platform
• For flat-surface mounting, see Section 2.1.1.
• For pole mounting, see Section 2.1.2.
2.1.1 Mount to a flat surface
1. Mount all four bolts to the same surface.
2. If mounting surface is not flat, use washers to shim the bracket.
3. Do not secure bolts to any separate beams, girders, wall studs, etc. that can move
independently.
Figure 2-1: Flat surface mounting example
4 x 5/16-inch or M8 bolt
(user-supplied)
To Next Page
Loading...
