Installation Manual 5
Planning
1 Planning
This installation manual explains basic installation guidelines for installing the Micro Motion
Model 3350 or Model 3700 MVD applications platform.
For information on I.S. applications, refer to Micro Motion approval documentation.
For complete instructions about configuration, maintenance, and service, refer to the
instruction manual shipped with the transmitter.
1.1 Installation kit
The Model 3350 or Model 3700 installation kit includes the parts shown in Figure 1-1.
Figure 1-1: Field-mount installation kit
WARNING!
Improper installation in a hazardous area can cause an explosion.
For information about hazardous applications, refer to the appropriate Micro Motion approval
documentation, shipped with the meter or available from the Micro Motion web site.
WARNING!
Hazardous voltage can cause severe injury or death.
Install transmitter and complete all wiring before supplying power.
CAUTION!
Improper installation can cause measurement error or meter failure.
Follow all instructions.
4 x flat washer
4 x Lock washer
4 x M8x16 bolt assemblies
Mounting bracket
You can orient the transmitter on
the bracket. See Section 1.5.
To Next Page
Loading...
