Installation Manual 13
Mounting
2.2 Mount the core processor
Use this section only if you are installing a remote transmitter using a remote core
processor or a remote enhanced core processor. See Figure 1-6. If you have a 4-wire remote
installation, go to Section 3.1.
Figure 2-3 shows both types of core processors and mounting bracket. Using the mounting
bracket, mount the core processor in a location compatible with the cable length
requirements discussed in Section 1.2.
Figure 2-3: Remote core processor and remote enhanced core processor components
Core processor lid
Upper conduit ring
Core processor
Lower conduit ring
End-cap
Mounting bracket
Remote core processor
Remote enhanced core processor
To Next Page
Loading...
