Emerson Micro Motion FDM

B
A
C
A. Circlip
B. PFA ring
C. PFA ring and circlip attached
3.7 Rotate the electronics on the meter (optional)
You can rotate the transmitter on the meter up to 90°.
Procedure
1. Using a 4 mm hex key, loosen the cap screw that holds the transmitter in place.
Figure 3-26: Component to secure transmitter in place
A
A. M5 socket-head cap screw
2. Rotate the transmitter clockwise to the desired orientation up to 90°.
3. Secure the cap screw in place and tighten to 60 in lbf (7 N m).
Mounting
Installation Manual
May 2019 MMI-20020989
36 Micro Motion Fork Density Meter