2 Micro Motion
®
Model D and DT Sensors Instruction Manual
Before You Begin continued
The D600 sensor and booster amplifier are available in any of the
configurations described in Table 2. Table 2 also lists the transmitters
that can be used with each configuration.
European installations
This Micro Motion product complies with all applicable European
directives when properly installed in accordance with the instructions in
this quick reference guide. Refer to the EC declaration of conformity for
directives that apply to this product.
The EC declaration of conformity, with all applicable European
directives, and the complete ATEX Installation Drawings and Instructions
are available on the internet at www.micromotion.com/atex or through
your local Micro Motion support center.
Information affixed to equipment that complies with the Pressure
Equipment Directive can be found on the internet at
www.micromotion.com/library.
Sensor components
Components of the sensor are illustrated on pages 3-6.
Table 2. D600 configurations and compatible transmitters
D600 sensor configuration
Booster amplifier location
Booster amplifier wiring
component
Connection to
transmitter Compatible transmitters
Integral to sensor Junction box 9-wire • Model 1700/2700 (with integral core
processor)
• Model 3500/3700 (9-wire)
• RFT9739
• RFT9712
• Remote core processor
Core processor 4-wire • Model 1700/2700
• Model 3500/3700 (MVD)
• Model 2500
• Direct host
(1)
Remote from sensor Junction box 9-wire • Model 1700/2700 (with integral core
processor)
• Model 3500/3700 (9-wire)
• RFT9739
• RFT9712
• Remote core processor
Core processor 4-wire • Model 1700/2700
• Model 3500/3700 (MVD)
• Model 2500
• Direct host
(1)
(1)A direct host is a user-supplied remote controller, PLC, or other device.
To Next Page
Loading...
Need help?
General
