Emerson Micro Motion Installation Manual

Micro Motion
®
Model D and DT Sensors Instruction Manual 17
Installation
Step 3 Mounting
Mounting any D or DT sensor
CAUTION
Using the sensor to support piping
can damage the sensor or
cause measurement error.
Do not use sensor to support pipe.
Keys for sensor mounting
Use your common piping practices to minimize:
• Torque on process connections
• Bending load on process connections
• For proper orientation, see pages 14-16
• For optional D600 mounting, see page 18

Emerson Micro Motion Specifications

General

Category	Measuring Instruments
Manufacturer	Emerson
Brand	Micro Motion
Type	Coriolis Flow Meter
Output	4-20 mA, HART, Foundation Fieldbus, Profibus, Modbus
Power Supply	24 V DC
Material	Stainless Steel, Hastelloy
Process Connection	Flanged, Threaded
Certifications	ATEX, IECEx, CSA, SIL
Pressure Rating	Varies by model; up to 10, 000 psi (690 bar)
Temperature Range	Varies by model; -400 to 750°F (-240 to 400°C)