EasyManua.ls Logo

Emerson MS3108 - Power Source Requirements; System Placement Guidelines

Emerson MS3108
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
AC Plug
AC Outlet
Power Source
This system is designed to operate on 120V AC 60Hz house current only.
Connecting this system to any other power source may cause damage to the
system and such damage is not covered by your warranty.
NOTE: The system has polarized AC plug with one wide blade and one narrow
blade. The plug will only fit into matching polarized AC outlets.
This is a safety feature to reduce the
possibility of electric shock. If the plug
will not fit in your AC outlets, you probably
have outdated non-polarized outlet. You
should have your outdated outlet
changed by a qualified, licensed
electrician. Do not file the wide blade on
the plug, or use an adapter to make the
plug fit into your outlet. This defeats the
safety feature and could expose you to
electric shock.
Placement Of The System
The system should be placed on a stable, level surface such as a table, shelf, or
stand, convenient to a 120V 60Hz AC outlet, out of direct sunlight, and away from
sources of excess heat, dust, moisture, or vibration.
Although the main unit is 9.75high with the CD door closed, 12of clearance is
required for the CD door to open fully. If you are using this unit on a bookshelf
make sure there is a gap of at least 12between the shelves. If the CD door
encounters an obstruction while opening it will close again automatically.
MS3108_062806.p65 28/6/2006, 16:5411

Related product manuals