29
Programmed Playback
The Programmed Playback feature allows you to program a total of up to 20 tracks
from among all 3 discs for playback in any desired order. You may program the
same track to play several times within a program sequence if desired.
NOTE: You cannot program tracks during playback. If a disc is playing press
the STOP/BAND button first to stop playback before beginning the
programming steps below.
1.) Load up to 3 discs in the player and wait until the player has read the Table of
Contents of all discs.
2.) Press the MEMORY/CLOCK ADJ. button.
The MEMORY indicator and Program
Memory P- 01 will flash and the display
will show DISC 1, Track 00.
3.) Press one of the CD buttons to select
the disc that contains the first track to be
programmed. (Example: DISC 3).
Then press the or buttons to
select the first track on that disc to be
programmed. (Example: Track 7).
4.) Press the MEMORY/CLOCK ADJ.
button again to enter DISC 3 / Track 7 in
program memory. The program memory
number advance to “P- 02”.
MS3108_062806.p65 28/6/2006, 16:5429
To Next Page
Loading...
Need help?
General
