46 Powerdrive F300 Getting Started Guide
Issue Number: 5
5 Getting started
This chapter introduces the user interfaces, menu structure and security level of the drive.
5.1 Understanding the display
The keypad can only be mounted on the drive.
5.1.1 KI-HOA Keypad RTC
The KI-HOA Keypad RTC display consists of two rows of text. The upper row shows the drive status
or the menu and parameter number currently being viewed. The lower row of the display line shows
the parameter value or the specific trip type. The last two characters on the first row may display
special indications. If more than one of these indications is active then the indications are prioritized
as shown in Table 5-1
When the drive is powered up the lower row will show the power up parameter defined by Parameter
Displayed At Power-up (11.022).
Figure 5-1 KI-HOA Keypad RTC
The red button is also used to reset the drive.
1. Escape button
2. Auto
3. Hand button
4. Navigation keys (x4)
5. Off / Reset
6. Enter button
Powerdrive F300 Getting Started Guide English Iss2.book Page 46 Tuesday, July 28, 2015 3:23 PM
To Next Page
Loading...
