Emerson Powerdrive F300 - Product Information

Powerdrive F300 Getting Started Guide 7
Issue Number: 5
Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting started
Basic parameters
(Menu 0)
Running the
motor
Optimization
NV Media Card
Operation
Further
information
UL listing
information
2 Product information
This guide covers the Powerdrive F300 product.
Table 2-1 Supported operating modes
2.1 Model number
The way in which the model numbers for the Powerdrive F300 product range is formed is illustrated
below:
Figure 2-1 Model number
* Only shown on frame size 9 and above identification label.
For simplicity a Frame 9 drive with no internal choke (i.e. Model 09xxxxxxE) is referred to as a Frame
9E and a Frame 9 drive with an internal choke (i.e. Model 09xxxxxxA) is referred to as a Frame 9A.
Any reference to Frame 9 is applicable to both sizes 9E and 9A. All Frame size 10 and 11 drives are
supplied with no internal choke.
Product
Supported operating modes
Open-Loop RFC-A Sensorless RFC-S Sensorless
Powerdrive F300 33 3
Identification Label
Electrical Specifications
Derivative
Powerdrive F300
Product Line:
Frame Size:
Voltage Rating:
Current Rating:
Normal Duty current rating x 10
Power Format:
Reserved
0
Optional Build
Customer Code
01
A B 1 00
Customer Code:
00 = 50 Hz
01 = 60 Hz
Conformal Coating
0 = No keypad
3 = HVAC keypad
:
0 = Standard
IP / NEMA Rating:
1 = IP21 / NEMA 1
Brake transistor:
B = Brake
N=No
Cooling:
A = Air
Documentation
1
Documentation:
0 - Supplied separately
1 - English
2 - 200 V (200 - 240
- 400 V (380 - 480
- 575 V (500 - 575
- 690 V (500 - 690
± 10 %)
4 ±
±
±
10 %)
510%)
610%)
Power
Format
F300 03 4 00078 A
Configuration*
1
A - AC in AC out (with internal choke)
E - AC in AC out (without internal choke)
Configuration:
1 - Standard
U - No Control
M - Master
F - Follower
NOTE
Powerdrive F300 Getting Started Guide English Iss2.book Page 7 Tuesday, July 28, 2015 3:23 PM