Emerson Powerdrive F300 - Page 54

54 Powerdrive F300 Getting Started Guide
Issue Number: 5
6 Basic parameters (Menu 0)
Parameter
Range Default
Type
OL RFC-A RFC-S OL RFC-A RFC-S
00.001
Minimum Reference
Clamp
{01.007} ±VM_NEGATIVE_REF_CLAMP1 Hz / rpm 0 Hz / rpm RW Num US
00.002
Maximum
Reference Clamp1
{01.006} ±VM_POSITIVE_REF_CLAMP1 Hz / rpm
50 Hz: 50.0 Hz
60 Hz: 60.0 Hz
50 Hz: 1500.0
rpm
60 Hz: 1800.0
rpm
RW Num US
00.003 Acceleration Rate 1 {02.011}
±VM_ACCEL_RATE
s to Pr 01.006
±VM_ACCEL_RATE
s to Pr 01.006
20.0 s
to Pr 01.006
20.000 s
to Pr 01.006
RW Num US
00.004 Deceleration Rate 1 {02.021}
±VM_ACCEL_RATE
s to Pr 01.006
±VM_ACCEL_RATE
s to Pr 01.006
20.0 s
to Pr 01.006
20.000 s
to Pr 01.006
RW Num US
00.005 Reference Selector {01.014}
A1 A2 (0),A1 Preset (1), A2 Preset (2),
Preset (3), Keypad (4), Precision (5),
Keypad Ref (6)
A1 A2 (0) RW Txt US
00.006
Symmetrical
Current Limit
{04.007} ±VM_MOTOR1_CURRENT_LIMIT % 110.0 % 110.0 % RW Num RA US
00.007
Open-loop Control
Mode / Action On
Enable
{05.014}
Ur S (0),Ur (1),
Fixed (2),
Ur Auto (3),
Ur I (4), Square (5),
Current 1P (6)
Ur I (4) RW Txt US
Speed Controller
Proportional Gain
Kp1
{03.010}
0.0000 to 200.000
s/rad
0.0300 s/rad RW Num US
00.008
Low Frequency
Voltage Boost
{05.015} 0.0 to 25.0 %
3.0 % RW Num US
Speed Controller
Integral Gain Ki1
{03.011}
0.00 to 655.35
s
2
/rad
0.10 s
2
/rad
RW Num US
00.009
Dynamic V to F
Select
{05.013} Off (0) or On (1)
Off (0) RW Bit US
Speed Controller
Differential
Feedback Gain Kd
1
{03.012}
0.00000 to 0.65535
1/rad
0.00000 1/rad RW Num US
00.010
Motor Rpm {05.004} ±180000 rpm
RO Num ND NC PT FI
Speed Feedback {03.002}
±VM_SPEED rpm RO Num ND NC PT FI
00.011 Output Frequency {05.001} ±VM_SPEED_FREQ_REF Hz
RO Num ND NC PT FI
00.012 Current Magnitude {04.001} ±VM_DRIVE_CURRENT_UNIPOLAR A
RO Bit ND NC PT FI
00.013
Torque Producing
Current
{04.002} ±VM_DRIVE_CURRENT A
RO Bit ND NC PT FI
00.015 Ramp Mode Select {02.004}
Standard (1),
Std boost (2)
Standard (1) Standard (1) RW Txt US
00.017
Digital Input 6
Destination
{08.026} 0.000 to 59.999
0.000 RW Num DE PT US
Current Reference
Filter 1 Time
Constant
{04.012}
0.0 to 25.0 ms 1.0 ms RW Num US
00.019
Analog Input 1
Mode
{07.007}
4-20mA Low (-4), 20-4mA Low (-3),
4-20mA Hold (-2), 20-4mA Hold (-1),
0-20mA (0), 20-0mA (1), 4-20mA Trip (2),
20-4mA Trip (3), 4-20mA (4), 20-4mA (5),
Volt (6), Therm Short Cct (7), Thermistor (8),
Therm No Trip (9)
4-20mA (4) RW Txt US
00.020
Analog Input 1
Destination
{07.010} 00.000 to 59.999 01.036 RW Num DE PT US
00.021
Analog Input 2
Mode
{07.011}
4-20mA Low (-4), 20-4mA Low (-3),
4-20mA Hold (-2), 20-4mA Hold (-1),
0-20mA (0), 20-0mA (1), 4-20mA Trip (2),
20-4mA Trip (3), 4-20mA (4), 20-4mA (5),
Volt (6), Therm Short Cct (7), Thermistor (8),
Therm No Trip (9)
Volt (6) RW Txt US
Powerdrive F300 Getting Started Guide English Iss2.book Page 54 Tuesday, July 28, 2015 3:23 PM