Powerdrive F300 Getting Started Guide 57
Issue Number: 5
Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting started
Basic parameters
(Menu 0)
Running the
motor
Optimization
NV Media Card
Operation
Further
information
UL listing
information
6.1 Parameter descriptions
6.1.1 Pr mm.000
Pr mm.000 is available in all menus, commonly used functions are provided as text strings in
Pr mm.000 shown in Table 6-1. The functions in Table 6-1 can also be selected by entering the
appropriate numeric values (as shown in Table 6-2) in Pr mm.000. For example, enter 7001 in
Pr mm.000 to erase the file in NV media card location 001.
Table 6-1 Commonly used functions in Pr mm.000
String Action
Save parameters
Save parameters when under voltage is not active and low voltage threshold is not
active
Load file 1 Load the drive parameters or user program file from NV media card file 001
Save to file 1 Transfer the drive parameters to parameter file 001
Load file 2 Load the drive parameters or user program file from NV media card file 002
Save to file 2 Transfer the drive parameters to parameter file 002
Load file 3 Load the drive parameters or user program file from NV media card file 003
Save to file 3 Transfer the drive parameters to parameter file 003
Show non-default Displays parameters that are different from defaults
Destinations Displays parameters that are set
Reset 50Hz Defs Load parameters with standard (50 Hz) defaults
Reset 60Hz Defs Load parameters with US (60 Hz) defaults
Reset modules Reset all option modules
Read Enc.NP P1 No function on F300
Read Enc.NP P2 No function on F300
Powerdrive F300 Getting Started Guide English Iss2.book Page 57 Tuesday, July 28, 2015 3:23 PM
To Next Page
Loading...
