Electronic Bypass Controller Installation and Commissioning Guide 21
3.3 Ending Operation
There are two (2) options available for ending operation.
1. Press OFF/RESET button once – Cancels the start mode of operation.
2. Press OFF/RESET button twice – Cancels the operation mode.
Incoming
Power
Power On
1 Select Operation Mode
RUN
(1) Rest mechanical overload inside enclosure
Alarm Display
2 Select Run Mode
Input
Contactor
Bypass
Contactor
Output
Contactor
Motor (1)
Overload
External
Safety
Fire
Alarm
VFD
Fault
Press OFF/RESET once to cancel RUN mode
Press OFF/RESET twice to cancel OPERATION mode
TEST HAND
VFD AUTO
OFF
RESET
BYPASS
VFD
M
To Next Page
Loading...
