Example
Figure C-4: Gateway Context Menu (Right Click)
Now the Gateway and wireless devices are fully commissioned and available to use in
other DeltaV applications. When new devices are added to the wireless network, they will
need to be assigned to DeltaV channels through the reconcile process (right click on
Gateway and select configure IO).
Note
Logging in to the Gateway is not possible using the default TCP/IP network setting. If the
Gateway is decommissioned, use an IP address 10.5.255.254. If the Gateway is
commissioned, right click on the Gateway in DeltaV Explore and select Wireless Gateway
Web Interface.
Reference Manual DeltaV
™
Ready
00809-0200-4420 September 2020
Emerson.com/Rosemount 83
To Next Page
Loading...
