3. Navigate to System Settings → Gateway → Redundancy.
• Gateway A’s factory serial number will be assigned to Gateway A.
• Gateway B’s factory serial number will be assigned to Gateway B.
Example
The Gateway names will be used in diagnostic messages and host system integration to
help identify each Gateway. It is recommended that these names be marked on each
physical Gateway, in addition to the configuration settings.
Selecting left or right for Gateway A is for visualization purposes only. It has no effect on
performance or functionality.
Figure D-1: System Settings>Gateway>Redundancy
Redundancy Reference Manual
September 2020 00809-0200-4420
86 Emerson.com/Rosemount
To Next Page
Loading...
Need help?
General
