62 • XM678D I&O Manual 026-1219 Rev 3
7. Scroll to the field of the XM678D device that
will be associated with the Case Control Circuit,
press
(LOOK UP), and select the circuit.
To verify the connections from the Case Circuit to the
XM678, sel
ect the circuit from the Case Control
Association screen (Figure 24-3) Press
(SETUP CKT), and go to the Outputs tab.
Figure 24-2 - Controller Associations List
Figure 24-3 - Case Control Association Screen
Figure 24-4 - Case Control Circuit Selection
Figure 24-5 - Case Control Circuit Outputs Tab
To Next Page
Loading...
