14 • XM678D I&O Manual 026-1219 Rev 3
7 Battery Back Up Connection
7.1. XEC Supercap Connection
XEC Supercap is designed to be used with Dixell products (XM678D, XEV, IEV, and others); compatibility
with Dixell devices has to be verified in the user manual/technical sheet of the device. If problems occur, contact
Dixell Service department at 770-425-2724.
Wiring Connection
NOTE: XEC Supercap and XM678D must be
powered by two different transformers; failure
on observance of this rule may result to
damage to the XEC Supercap and/or to the
connected XM678D.
XM678D XEC
Terminal 61 (+) Terminal 4 (12Vdc)
Terminal 62 (-) Terminal 3 (gnd)
Table 7-1 - XM678D and XEC Wiring Connection
Figure 7-1 - XM678D - XEC Supercap Connection
To Next Page
Loading...
