1592028010 XWEB300D_500D_500 EVO STP GB r1.2 12.06.2017.doc XWEB3000/5000 EVO 18/22
Enter the telephone number of the line that XWEB-EVO is connected to. If there is a switchboard and the
number that needs to be dialled for the external line is 0, enter: 0,04379833. Enter ‘dixell’ as the user name
and password connection parameters. Enter a name to identify the XWEB-EVO that you wish to contact with
the call.
6.2.2 MAKING THE REMOTE ACCESS CALL
When the configuration step is finished, set up the call to XWEB as illustrated in the pictures below, which
represent the calling procedure for computers with WINDOWS 7.
When the connection has been set up between your PC and XWEBEVO, use your browser to access
http://192.168.1.150 . When the login page opens correctly, this means that the execution test of the entire
procedure is complete.
To Next Page
Loading...
Need help?
General
