Emerson XWEB500D User Manual

1592028010 XWEB300D_500D_500 EVO STP GB r1.2 12.06.2017.doc XWEB3000/5000 EVO 6/22
4. XWEB INSTALLATION
For installation, the XWEB-EVO system must not be opened in any way. If the box is opened, the warranty
will lapse. XWEB-EVO can be installed in various ways based on the model and type of user interface
access that you wish to provide for the final user. The particular features of these types of connectivity are
described herein.
CAUTION: in order to protect yourself and the XWEB, turn on the unit only after connecting all the electrical
devices. In order to avoid accidental operation, connect the power cord only after connecting all the other
external units.
TERMINAL BLOCK (ONLY FOR DIN MODELS)
3
: Alarm relay 1 (**)
4
5
: Alarm relay 2 (**)
6
7
: System alarm relay
: 7-8 No alarm
: 7-9 Alarm present
8
9
15
: Digital input (**)
16
12 (-)
: RS 485
13 (+)
14 ()
: 1-2 XWEB Power supply
: 10-11 External GSM modem power supply (*)
: USB external peripherals
: COM port for external modem
: Telephone jack (only for internal modem)
: RJ45 LAN connector
position of the terminals on XWEB500D

Emerson XWEB500D Specifications

General

Brand	Emerson
Model	XWEB500D
Category	Controller
Language	English