1592028010 XWEB300D_500D_500 EVO STP GB r1.2 12.06.2017.doc XWEB3000/5000 EVO 19/22
6.3 INTRANET (“OR LAN CONNECTION”) AND VPN CONNECTIVITY
This type of connection allows you to access XWEB-EVO from any PC connected to the local network. This
type of connection must also be used to configure XWEB-EVO for internet connection through VPN (Virtual
Private Network). This last type of connection, once it has been set up, makes your PC -- connected to the
internet -- part of the local XWEB-EVO network.
Caution: your company's connection to the local network needs to be managed by qualified staff and/or a
network administrator. If you wish to use a VPN network for access, this person must be able to assign a
valid IP address to XWEB-EVO and provide -- for your PC -- any software and credentials.
Before connecting XWEB-EVO to the network, make sure that the IP address you wish to use for XWEB-
EVO has not already been claimed and can therefore be used. You can run a PING on that address, and if
you receive at least one reply the address needs to be changed, as this means it is already in use.
Example:
Another way of finding out what IP addresses are already in use on a line is using the ARP control. We
recommend reading the documents relative to the operating system that you are using and/or seek the
assistance of qualified staff for network configuration.
Before connecting XWEB-EVO to the network, please configure the IP (and the other network configuration
parameters) using the direct local connection (with screen, keyboard and mouse) or the local PC connection
with cross cable. When the network parameters are set, it is possible to connect XWEB-EVO to the local
network using a standard RJ45 cable. Connect your PC to XWEB-EVO by opening your browser and
entering the XWEB-EVO IP address in the address bar. http://192.168.0.200/The default address is: Save
this address in your list of favourites.
To Next Page
Loading...
Need help?
General
