Field Description
Status Enable or Disable the Wireless LAN Interface.
Default: ON
Wi-Fi
Network
Name (SSID)
Specify your 2.4GHz network name.
Default: Eminent
Each Wireless LAN network uses a unique Network
Name to identify the network. This name is called the
Service Set Identifier (SSID). If you keep default
network name ( SSID ) Eminent, then this is the
network you want to connect to using your mobile
device. You are also free to change the SSID name.
This new made network name will then be the one to
make a wireless connection with.
Broadcast
SSID
At default = Enabled.
Disable SSID broadcasting to hide the network name
and make it more secure. Please note, if you disable
this function then you have to manually add a wireless
network connection in your mobile device.
Wireless
Mode
Specify the WLAN Mode. Supported = B/G/N
Channel
Width
Choose a Channel Width from the pull-down menu.
Supported = 20/40 MHz
Channel
Number
Choose a Channel Number from the pull-down menu.
Select between channel 1 and 13, depending which
channel width is selected, to determine what will be the
most stable channel for your wireless 2.4GHz network.
Select “Auto” to let the router determine the most
stable connection.
Maximum
Downlink
Adds a restriction for the maximum downlink
throughput speed. At default = 0, which means no
restriction.
Maximum
Uplink
Adds a restriction for the maximum uplink throughput
speed. At default = 0, which means no restriction.
To Next Page
Loading...