12
|
ENGLISH
7.1.1 Connect the EM7580 to an AV receiver by “HDMI”
1. Connect one side of the HDMI cable to the HDMI output of the EM7580.
2. Connect the other side of the HDMI cable to the HDMI input of your Home Cinema
Set.
3. Connect a second HDMI cable ( not included ) to the HDMI output of your Home
Cinema set.
4. Connect the other side of the second HDMI cable ( not included ) to an available
HDMI input of your TV.
7.1.2 Connect the EM7580 to an AV receiver by HDMI and optical cable
1. Connect one side of the HDMI cable to the HDMI output of the EM7580.
2. Connect the other side of the HDMI cable to the HDMI input of your TV.
3. Connect the optical cable ( not included ) to the optical output of your EM7580.
4. Connect the other side of the optical cable ( not included ) to an available optical
input of your Home Cinema Set.
7.2 Audio passthrough setup for HDMI and S/PDIF
The following instructions are for both HDMI and S/PDIF the same.
1. Switch the power switch to “ON” to boot the TV streamer.
2. Once the TV streamer has booted, the home screen appears:
S/PDIF
To Next Page
Loading...
