11
|
ENGLISH
8. Click on ‘Time zone’ country to add the corresponding country for proper time
zone.
7.0 Audio passthrough setup
If your EM7580 is connected to a AV receiver by HDMI or S/PDIF connection, you will
need to “enable passthrough” so your AV receiver will be able to decode the audio
streams such like DTS or Dolby Digital.
Before you power on the TV streamer, please make sure to setup properly the
connection between TV and AV receiver as described in the following steps.
7.1 Connect the EM7580 with an HDMI and/or S/PDIF cable
via your Home cinema set to your TV
HDMI
To Next Page
Loading...
