To Next Page

To Previous Page

Fire control panel buttons

SmartCell control panel

function

The ALARMS SOUND/SILENCE button is used to sound the alarms and to silence them

when they are ringing. Wireless output devices can also be switched on and oﬀ

(dependant on programming). This button only becomes active once a valid user

access code has been entered, or the keyswitch has been enabled (turned to the on

position).

The SILENCE BUZZER button is always active and is used to silence the SmartCell

control panel’s internal buzzer.

The RESET button is used to reset fire and fault events. This button only becomes

active once a valid user access code has been entered, or the keyswitch has been

enabled (turned to the on position).

This button is always active and is used for number entry (number 1) and for upwards

menu navigation.

This button is always active and is used for number entry (number 2) and for forwards

menu navigation.

This button is always active and is used for number entry (number 3) and for

downwards menu navigation.

This button is always active and is used for number entry (number 4) and for

backwards menu navigation.

This button is always active and is used as a menu entry button.

The FUNCTION 1 button is fully programmable. Its default operation, is to toggle

between the primary and secondary languages that are programmed to the system.

This button only becomes active, once a valid access code has been entered.

This button is also used to silence information sounders, upon an information event.

The FUNCTION 2 button is fully programmable. Its default operation, is to carry out a

lamp indicator test on the SmartCell control panel. This button only becomes active,

once a valid user access code has been entered.

Control

feature

SILENCE

BUZZER

SOUND/

SILENCE

RESET

FUNCTION 1

FUNCTION 2

ALARMS

EMS SmartCell User Guide

Other manuals for EMS SmartCell