©2021 EMS Ltd. All rights reserved. Page 5 of 28 TSD113-0001-99 (Issue 3) 19/05/2021 AJM
Sounders and sounder beacons
Sounders and sounders with integrated beacons will
sound and flash in the event of a fire, in accordance with
the system configuration, so that the building can be
appropriately evacuated.
Beacons are used for many applications including
notifying individuals with hearing impairment of an
alarm, and are also effective in noisy environments.
For more information on how your sounders and sounder
beacons are configured to operate in the event of a fire,
contact your installer/maintenance company.
Input / output devices
Input / output devices are specialist equipment that can
be used for connecting to other third party equipment.
For more information, contact your installer /
maintenance company.
Approved to EN54-3, EN54-13, EN54-23* and EN54-25
*Beacon Variants Only.
Approved to EN54-13, EN54-18 and EN54-25.
STATUS
DUAL INPUT/OUTPUT DEVICE
LOG ON POINT
Door controllers
Door controllers hold heavy fire doors open, improving
building ventilation and automatically closes in the event
of a fire.
SmartDoor is 100% wireless and is controlled by the
SmartCell control panel.
For more information, contact your installer /
maintenance company.
Approved to BS EN1155, BS 7273-4 and
EN54-25.
Wireless remote indicators
Remote indicators are often linked to detectors that are
obscured from view, such as in ceiling voids and lift shafts.
Upon re activation from an associated detector, remote
indicators turn on to provide local visual indication.
Remote indicators are also tted outside apartments, for
quick and easy identification without entry.
Remote indicators can be linked to an individual detector,
or a group of detectors.
For more information, contact your installer /
maintenance company.
Approved to EN54-13 and EN54-25.
To Next Page
Loading...
Need help?
General