EMTEST N Series - Appendix; Declaration of Conformity

EM TEST CNV 504Sx / 508Sx
Operating manual V 1.20 21 / 23
8.
Appendix
8.1.
Declaration of conformity
Manufacturer :
EM TEST (Switzerland) GmbH
Address:
Sternenhofstr. 15
CH 4153 Reinach
Switzerland
declares, that under is sole responsibility, the product’s listed below, including all their options, are conformity with the
applicable CE directives listed below using the relevant section of the following EC standards and other normative
documents.
Product‘s name:
Coupling network for Oscillating Compact Simulator
Model Number(s)
CNV 504N1.1, CNV 504N1.2, : CNV 504N1.3, N1.6, CNV 504N2.2
CNV 508N1.1, CNV 508N1.2, CNV508N2, CNV 508N2.3
All other special CNV 5XX NX.Y
Low Voltage Directive 2014/35/EU
Standard to which conformity is declared:
EN 61010-1:2011
Safety requirements for electrical equipment for measurement, control, and
laboratory use.
EMC Directive 2014/30/EU
Standard(s) to which conformity is declared:
EN 61326-1:2013
Electrical equipment for measurement, control and laboratory use
(Requirements for devices to use in industrial area.)
The purpose of this instrument is the generation of defined interferences signals for EMI immunity testing. De-
pending on the arrangement of the test rig, the configuration, the cabling and the properties of the EUT itself, a
significant amount of electromagnetic radiation may result that could also affect other equipment and systems.
The user himself or herself is ultimately responsible for the correct and controlled operation of the rig. In case of
doubt, the tests should be carried out in a Faraday cage.
European representative
Manufacturer
AMETEK CTS Germany GmbH
EM TEST (Switzerland) GmbH
Lünenerstr. 211
Sternenhofstr. 15
D 59174 Kamen
CH 4153 Reinach
Tel: +49 (0) 2307 / 26070-0
Tel: +41 61-7179191
Fax: +49 (0)2307 / 17050
Fax: +41 61-7179199
By
A. Gerstner
General manager
A. Burger
Business Manager Conducted EMC
Place
Kamen, Germany
Reinach BL, Switzerland
Date
20. December 2016
25. February 2016