PATCH EXAMPLES
KARPLUS-STRONG SYNTHESIS
ROUTING 1
Ghost can function as a complete Karplus-Strong Voice by using the delay at the
shortest time setting for sound generation and built-in filter, VCAs and envelope as
tonal / dynamics control.
🠚 Set the ROUTING mode to the first order (FX → DISTORTION → VCF) when
ROUTING button LED is off
🠚 Set REPEATS to maximum with TIME/DIV delay time turned fully CCW.
Moderately adjust DELAY DRY/WET to the 12 o’clock
🠚 Feed any audio to the GHOST audio inputs to start up the Karplus-Strong sound
generation. You will hear a strong recirculating oscillator sound of approximate C4
note (~261 Hz). Its amplitude is rather high, therefore it is convenient to adjust it by
DELAY DRY/WET knob
🠚 Patch a trigger / gate signal from your sequencer to the SIDECHAIN TRIGGER
input: this will trigger an internal envelope that will come out from the ENVELOPE
OUT . The decay of the envelope is controlled by the SIDECHAIN knob
🠚 Patch the signal from the ENVELOPE OUT to either DELAY DRY/WET CV IN or
the POST-VCA input to shape our oscillator in different stages
🠚 Split the ENVELOPE OUT signal and patch it to the VCF CV input for additional
tonal shaping
🠚 Connect the 1v/oct PITCH CV output from your sequencer and patch it to the
TIME CV 1V/OCT input of the DELAY
🠚 TIP: if you would like to add one extra octave to the available PITCH range of the
delay, set the TAPS DISTRIBUTION to STEREO mode via ROUTING + TAP .
LOW-END GROOVE A.K.A. TECHNO
RUMBLE BASS
ROUTING 2
Modern techno music is defined by a groovy low-end rumble, which along with the kick
drum defines the key element of the style. Ghost can generate such rumble from any
transient sound or same kick applied into the audio inputs.
🠚 Set the ROUTING mode to the second order (DISTORTION → VCF → FX) when ROUTING
button is semi lit
To Next Page
Loading...