Need help?Do you have a question about the Endress+Hauser Cerabar M PMC41 and is the answer not in the manual?
General| Type | Cerabar M PMC41 |
|---|---|
| Measurement Principle | Piezoresistive |
| Housing Material | Aluminum, stainless steel |
| Communication | HART |
| Measured Variable | Pressure |
| Process Temperature | -40°C to +100°C |
| Process Pressure | Up to 40 bar |
| Output Signal | 4 to 20 mA |
| Power Supply | 10.5 to 45 V DC |
| Protection Class | IP66 / IP67 |
| Wetted Parts Material | Ceramic |
| Operating Temperature | -40 to +85 °C |
| Ambient Temperature | -40 to +85 °C |
| Approvals | ATEX, IECEx, CSA |
| Process Connection | Threaded |
To Next Page
