TI399P/00/en/06.08
71064497
Technical Information
Cerabar M PMC41/45, PMP41/45/46/48
Process pressure measurement
Pressure transmitter with ceramic and metal sensors
Overload-resistant and function-monitored
With Analog, HART or PROFIBUS PA Electronics
Application
The Cerabar M pressure transmitters measure
overpressure and absolute pressure in gases, steam,
liquids and dusts. Thanks to the modular instrument
concept, Cerabar M suits all areas of process engineering.
All hygienic connections, threaded connections and
flanges (also as diaphragm seals) are available as process
connections.
Your benefits
• Performance characteristics
– Reference accuracy better than 0.2% of the set
measuring range
(optional: non-linearity better than 0.1%)
– Configurable measuring range up to TD 10:1
– Long-term stability better than 0.25 % / 3 years
• Deployed for pressure monitoring up to SIL 2 as per
IEC 61508/IEC 61511-1
•Sensors
– Dry capacitance ceramic sensor (Ceraphire
®
) for
measuring ranges up to 40 bar - overload-resistant,
vacuum-proof, stable against alternating load
– Piezoresistive sensor with metal diaphragm for
measuring ranges up to 400 bar
• Output signals: 4 to 20 mA, 4 to 20 mA with HART,
PROFIBUS PA
• Housing
With its stainless steel housing with no dead space,
Cerabar M meets the hygienic requirements of the
food and pharmaceutical industries.
The coated aluminum housing has already stood the
test of time in the process industry.
• Device versions compliant with ASME-BPE
To Next Page
Need help?
General
