Endress+Hauser Cerabar M PMC41 - Overview of Diaphragm Seals for PMP46

Cerabar M
Endress+Hauser 5
Overview of diaphragm seals
for PMP46
Design Diaphragm seal Connection Version Standard Nominal diameter Nominal pressure/
Class
Hygienic
version
Membrane
diaphragm seal
(MDM)
Nozzle with coupling
nut
P01-PMP46xxx-03-xx-xx-xx-000
DIN 11851 – DN 32
–DN 40
–DN 50
–PN 40
–PN 40
–PN 25
P01-PMP46xxx-03-xx-xx-xx-001
SMS – 1 1/2"
–2"
PN 25
P01-PMP46xxx-03-xx-xx-xx-002
RJT – 1 1/2"
–2"
PN 40
P01-PMP46xxx-03-xx-xx-xx-003
ISS – 1 1/2"
–2"
PN 40
Varivent
P01-PMP46xxx-03-xx-xx-xx-004
– Type F for pipes
DN 25 – DN 32
– Type N for pipes
DN 40 – DN 162
PN 40
Clamp
P01-PMP46xxx-03-xx-xx-xx-005
ISO 2852 – DN 25 (1")
– DN 38 (1 1/2")
– DN 51 (2")
– DN 76.1 (3")
Dependent on the
clamp used
DRD
P01-PMP46xxx-03-xx-xx-xx-006
DN50 (65 mm) PN 25
Pipe diaphragm
seal (RDM)
Threaded adapter
P01-PMP46xxx-03-xx-xx-xx-007
DIN 11851 – DN 25 PN 40
– DN 40 PN 40
– DN 50 PN 25
Clamp
P01-PMP46xxx-03-xx-xx-xx-008
ISO 2852 – DN 10 (3/4")
– DN 16 (3/4")
– DN 25 (1")
– DN 38 (1 1/2")
– DN 51 (2")
Dependent on the
clamp used
Versions
compliant with
ASME-BPE for use
in biotechnical
processes; wetted
surfaces
R
a
≤ 0.4 *m
(15.75 *in;
180 grit),
electropolished
Membrane
diaphragm seal
(MDM)
Clamp
P01-PMP46xxx-03-xx-xx-xx-005
ISO 2852 – DN 38 (1 1/2")
– DN 51 (2")
Dependent on the
clamp used
Varivent
P01-PMP46xxx-03-xx-xx-xx-004
– Type N for pipes
DN 40 – DN 162
PN 40