Endress+Hauser Cerabar M PMC41 - Process Connections PMC45; (With Ceramic Measuring Diaphragm)

Cerabar M
Endress+Hauser 33
Process connections PMC45
(with ceramic measuring
diaphragm)
Note!
• The installation heights in brackets apply to housings with a raised cover (for optional display). Installation
heights written in italics apply to devices with an aluminum housing.
• Devices with an aluminum housing, raised cover, threaded connection or hygiene connection weigh approx.
2.1 kg. The weights for devices with an aluminum housing, raised cover and flange are given in the tables
from Page 37 onwards. Devices with a stainless steel housing weigh approx. 300 g less.
• Many process connections with an EPDM or HNBR seal are 3A-approved for PMC45. This means that a
3A-approved process connection with an EPDM or HNBR seal must be selected when ordering for the
3A approval for the PMC45 version to be valid. → For ordering information on EPDM or HNBR seals, see
Page 70 "Ordering information PMC45", feature 80 "Sensor seal", version 2 or 4.
Thread, flush-mounted diaphragm
P01-PMC45xxx-06-09-xx-xx-000
Process connections PMC45, threaded connection, material AISI 316L
➀ Version AG: thread ISO 228 G1 1/2 A
Endress+Hauser also offers welding necks for this process connection. See the following section.
➁ Version AR: thread ISO 228 G 2 A
➂ Version BF: thread ANSI 1 1/2 MNPT
➃ Version BR: thread ANSI 2 MNPT
➄ Version XK: thread DIN 13 M 44x1.25
G1½
1½ NPT
SW 60
SW 60
SW 60
M 44 x 1.25
27
ø40.5
22
2 NPT
30
SW 70
ø26
ø26
153.5 (173.5)
25
ø26
ø26
163.5 (178.5)
153.5 (173.5)
163.5 (178.5)
153.5 (173.5)
163.5 (178.5)
154.5 (174.5)
164.5 (179.5)
➀
G1½A
➁
G2
➂
1½ NPT
➃
2 NPT
➄
M 44 x 1.25
ø55
11
G2A
24
154.5 (174.5)
ø68
SW 70
ø26
164.5 (179.5)