Endress+Hauser Cerabar M PMC41 - Process Connections PMP45 (with Metal Measuring Diaphragm)

Cerabar M
Endress+Hauser 43
Process connections PMP45
(with metal measuring
diaphragm)
Note!
• The installation heights in brackets apply to housings with a raised cover (for optional display). Installation
heights written in italics apply to devices with an aluminum housing.
Threaded connection, flush-mounted diaphragm
P01-PMP45xxx-06-09-xx-xx-000
Process connections PMP45, flush-mounted threaded connection, material: AISI 316L
➀ Version CD: thread ISO 228 G 1 A, seal metal taper AISI 316L
for welding neck see 2.
➁ Welding neck for process connection thread ISO 228 G 1 A (version CD)
order number: 52005087; order number with 3.1 inspection certificate: 52010171
max. pressure resistance: 100 bar
➂ Version BB: thread ANSI 3/4 MNPT
Note!
Endress+Hauser offers a pressure sensor dummy for the welding necks with order numbers 52005087 and
52010171. Order number for pressure sensor dummy: 52005272
Clamp connections
P01-PMP45xxx-06-09-xx-xx-001
Process connections PMP45, clamp connections, material AISI 316L Surface roughness of the surfaces in contact with the
medium R
a
≤ 0,8 μm als Standard. Lower surface roughness on request.
➀ Version DA: Clamp ISO 2852 DN 22 ( 3/4"), EHEDG, 3A, DIN 32676 DN 20
➁ Version DB: Tri-Clamp ISO 2852 DN 25 – DN 38 (1" – 1 1/2"), EHEDG, 3A, DIN 32676 DN 25 – DN 40
➂ Version DL: Tri-Clamp ISO 2852 DN 40 – DN 51 (2"), EHEDG, 3A, DIN 32676 DN 50
50
30
ø17
G1A
26.8
147 (167)
157 (172)
¾ NPT
ø17
22
➁
➀
G1A
➂
MNPT ¾
27.5
ø50.5
-0.05
ø43.5
ø17
ø17
ø34
-0.05
ø27.5
147 (167)
157 (172)
➀
➂➁
ø64
-0.05
ø56.5
ø17
147 (167)
157 (172)
147 (167)
157 (172)
147 (167)
157 (172)
147 (167)
157 (172)