Cerabar M
42 Endress+Hauser
Threaded connection, flush-mounted diaphragm
P01-PMP41xxx-06-09-xx-xx-001
Process connection PMP41, version 1D: thread ISO 228 G 1/2 with O-ring for welding neck,
material AISI 316L
This process connection can be selected with versions F or H for feature 80 "Seal; Fill fluid" (→ see Page 70).
Note!
Endress+Hauser offers a pressure sensor dummy for the welding necks with order numbers 52002643 and
52010172. Order number for pressure sensor dummy: 52005082
P01-PMP41xxx-06-09-xx-xx-003
Process connection PMP41, version 1F: thread G 1/2 A; screw-in adapter to DIN 3852-11 form E with seal,
material AISI 316L
This process connection can be selected with versions 1, 4 or P for feature 80 "Seal; Fill fluid"(→ see Page 70).
21
G½
ø26
G½
ø50
13
21
SW 27
max. pressure resistance
100 bar
– Welded neck
Order number: 52002643
– with 3.1 inspection certificate
Order number: 52010172
Viton seal
O-Ring 14 x 1.78
Viton or NBR
27
14
2.5
22
G½
14
G½
ø26
17
14
G½
ø26
17
PTFE seal
Alloy
spring
Teflon
Teflon back-up ring
Viton seal
For screw-in hole G ½
DIN 3852-11 form X
To Next Page
Loading...
