Cerabar M
8 Endress+Hauser
Communication protocol • 4 to 20 mA without communication protocol
• 4 to 20 mA with HART communication protocol
• PROFIBUS PA
– The Endress+Hauser devices meet the FISCO model requirements.
– Due to the low current consumption of 11 mA ±1 mA the following can be operated at one bus segment
when installing to FISCO:
– Up to 9 Cerabar M for EEx ia, CSA IS and FM IS applications
– Up to 32 Cerabar M for all other applications, e.g. in non-hazardous areas, EEx nA, etc.
Further information on PROFIBUS PA can be found in Operating Instructions BA034S "PROFIBUS DP/PA:
Guidelines for planning and commissioning" and in the PNO Guidelines (Profibus User Organization).
To Next Page
Loading...
