Cerabar M
Endress+Hauser 11
FieldCare – HART,
PROFIBUS PA
FieldCare is Endress+Hauser's plant asset management tool which is based on FDT technology. With
FieldCare, you can configure all of Endress+Hauser devices, as well as devices from other manufacturers that
support the FDT standard.
FieldCare supports the following functions:
• Configuration of transmitters in offline and online mode
• Loading and saving device data (upload/download)
• Documentation of the measuring point
Connection options:
• HART via Commubox FXA195 and the USB interface of a computer
• PROFIBUS PA via segment coupler and PROFIBUS interface card
For more information, see → www.endress.com.
Commuwin II – HART,
PROFIBUS PA
Commuwin II is a graphically supported operating program for intelligent measuring devices with the HART
and PROFIBUS PA communication protocols. The following operating systems are supported: Win 3.1/3.11,
Win 95, Win 98, WinNT4.0 and Win2000. Commuwin II shows the most important parameters.
Commuwin II supports the following functions:
• Configuration of measuring devices in online mode via matrix operation
• Loading and saving device data (upload/download)
• Visualization of measured values and limit values
• Presentation and recording of measured values with a line recorder
Connection options:
• HART via Commubox FXA191 and the RS 232 C serial interface of a computer
• PROFIBUS PA via segment coupler and PROFIBUS interface card
To Next Page
Loading...
