Endress+Hauser Cerabar M PMC41 - Mechanical Construction; Dimensions of Stainless Steel Housing; Dimensions of Aluminum Housing; General Note on Flanges

Cerabar M
Endress+Hauser 31
Mechanical construction
Dimensions of stainless steel
housing
P01-PMx4xxxx-06-xx-xx-xx-000
Dimensions of aluminum
housing
P01-PMx4xxxx-06-xx-xx-xx-001
General Note on flanges The roughness of the surface in contact with the medium, including the sealing surface of the flanges
(all standards), made of Hastelloy C, Monel or Tantalum is Ra 0.8.
Lower roughnesses are available on request.
Process connections PMC41
(with ceramic measuring
diaphragm)
Note!
• The installation heights in brackets apply to housings with a raised cover (for optional display). Installation
heights written in italics apply to devices with an aluminum housing.
Thread, inner diaphragm
P01-PMC41xxx-06-09-xx-xx-000
Process connections PMC41, thread ISO 228
➀ Thread ISO 228 G 1/2 A, version 1M: AISI 316L, version 2M: Alloy C276 (2.4819)
➁ Thread ISO 228 G 1/2 A bore 11.4 mm, version 1R: AISI 316L
➂ Thread ISO 228 G 1/2 A G 1/4 (female), version 1P: AISI 316L
97
82.5
74
102.5
117 74
92.5
107.5
135 (155)
20
17
ø3
ø6
3
G½
145 (160)
20
17
13
135 (155)
ø17.5
G½
G¼
145 (160)
20
17
135 (155)
ø17.5
ø11.4
G½
145 (160)
➀
G½A
➁
G ½ A 11.4 mm
➂
G½A G¼