Endress+Hauser Cerabar M PMC41 - Operation Via Universal HART Communicator DXR375

Cerabar M HART Operation
Endress+Hauser 27
5.4 Operation via Universal HART Communicator DXR375
When operating via the HART protocol, a menu operation system derived from the matrix is used
(see also Operating Instructions for the handheld terminal).
• The "Select group" menu calls up the matrix.
• The menu headers are displayed on the individual rows.
• The parameters are set via sub-menus.
P01-PMx4xxxx-19-xx-xx-en-028
Fig. 28: Left: Menu operation with the DXR375; right: Universal HART Communicator DXR375 handheld terminal
The electrical connection of the Universal HART Communicator DXR375 handheld terminal is
described in Section 4.2, and the step-by-step commissioning of the measuring point in Section 6.
I
O
PMC 41:LIC0001
Online
1 >Group Select
2 PV 20 mbar
HELP
F1 F4F2 F3
PMC 41: LIC0001
Online
2 PV 20 mbar
1->Wähle Gruppe
HELP
F1 F4F2 F3
PMC 41: LIC0001
Wähle Gruppe
2 Transmitter Information
3 Sensordaten
4 Service
5 Kommunikaton
1->Grundabgleich
HOME
F1 F4F2 F3
PMC 41: LIC0001
Wähle Gruppe
3 Setze 20 mA
4 Bestätige 4 mA
autom.
1->Meßwert
2 Setze 4 mA
HOME