Need help?Do you have a question about the Endress+Hauser Cerabar M PMP51 and is the answer not in the manual?
General| Device Type | Pressure transmitter |
|---|---|
| Measuring Principle | Piezoresistive |
| Measured variable | Pressure |
| Output Signal | 4 to 20 mA HART, PROFIBUS PA, FOUNDATION Fieldbus |
| Process Temperature | -40°C to +150°C |
| Ambient Temperature | -40°C to +85°C |
| Process Connection | flanges |
| Housing material | Aluminum |
| Wetted parts material | Stainless steel |
| Communication | HART, PROFIBUS PA, Foundation Fieldbus |
| Approvals | ATEX, IECEx, SIL, NEPSI, FM, CSA |
| Protection Class | IP66 |
| Material | Aluminum |
| Electrical Connection | M12 connector |
| Power supply | 10.5 to 45 V DC (depending on communication protocol) |
To Next Page