Endress+Hauser Cerabar M PMP51 Brief Operating Instructions

KA01027P/00/EN/14.12
71157157
Brief Operating Instructions
Deltabar M
PMD55
Differential pressure measurement
These are Brief Operating Instructions.
For more detailed information, please refer to the Operating Instructions and the
additional documentation on the CD-ROM provided.
These Brief Operating Instructions are not intended to replace the Operating
Instructions provided in the scope of supply.
The complete device documentation consists of:
• these Brief Operating Instructions
• a CD-ROM with:
– the Operating Instructions
– Technical Information

Endress+Hauser Cerabar M PMP51 Specifications

General

Device Type	Pressure transmitter
Measuring Principle	Piezoresistive
Measured variable	Pressure
Output Signal	4 to 20 mA HART, PROFIBUS PA, FOUNDATION Fieldbus
Process Temperature	-40°C to +150°C
Ambient Temperature	-40°C to +85°C
Process Connection	flanges
Housing material	Aluminum
Wetted parts material	Stainless steel
Communication	HART, PROFIBUS PA, Foundation Fieldbus
Approvals	ATEX, IECEx, SIL, NEPSI, FM, CSA
Protection Class	IP66
Material	Aluminum
Electrical Connection	M12 connector
Power supply	10.5 to 45 V DC (depending on communication protocol)