Products Solutions Services
TI00436P/00/EN/19.14
No. 71260300
Technical Information
Cerabar M
PMC51, PMP51, PMP55
Process pressure measurement
Pressure transmitter with ceramic and
metallic sensors
Application
The device is used for the following measuring tasks:
• Absolute pressure and gauge pressure measurement in gases, steams or liquids in all
areas of process engineering and process measurement technology
• Level, volume or mass measurements in liquids
• High process temperature
– without diaphragm seals up to 130 °C (266°F), for a maximum of 60 minutes
150 °C (302°F)
– with diaphragm seals up to 400 °C (752°F)
• High pressure up to 400 bar (6000 psi)
• International usage thanks to a wide range of approvals
Your benefits
• Very good reproducibility and long-term stability
• High reference accuracy: up to ±0.15%,
as PLATINUM version: ±0.075%
• Turn down up to 100:1
• Standardized platform for differential pressure, hydrostatics, and pressure
(Deltabar S – Deltapilot S – Cerabar S)
• Simple, fast commissioning through a user interface designed for real-world
applications
• Used for process pressure monitoring up to SIL2, certified to IEC 61508 Edition 2.0
and IEC 61511 by TÜV NORD
• New TempC diaphragm for diaphragm seals:
Minimum temperature effects, maximum diaphragm thickness and short recovery
times
• Device versions compliant with ASME-BPE
To Next Page
General
